Simplifi Digital Store > Amplifiers > ADAT Input Amplifiers > ADAT Input Media Center Amplifier-Consumer Line - Silver
7075AS Specifications
ADAT Input Media Center Amplifier-Consumer Line - Silver
Designed for Media Centers that utilize Intel motherboards with Intel High Definition audio, have the SigmalTel 9223 sound chip, and use Intel Audio Studio 2.0 software. The Model 7075A amplifier uses ADAT (Alesis Digital Audio Tape) for audio transport from the Media Center. ADAT is a professional, eight channel, optical audio standard that Intel supports on their higher end motherboards (including most Viiv products). With this architecture, all sound processing is done within the Media Center (in the digital domain) and is sent optically to the Model 7075A amplifier, where it is converted into the analog domain just before power amplification. By moving the digital to analog conversion into the amplifier chassis, the Model 7075A provides the user with the best possible sound experience and eliminates the possibility of electrical noise from the Media Center from degrading the audio. Intel Sound Studio 2.0 supports a variety of speaker configurations and uses Sonic Focus or Dolby Labs audio technologies for enhanced surround sound processing.
Recommended Usage:
For Media Center systems with Intel Audio Studio 2.0 and the SigmalTel 9223
sound chip.
How Do I Know If My Motherboard Supports ADAT?
Similar Models:
HD100A, 5075D, HD100
Features
- Class A/B Hybrid Design provides power and audio fidelity
- Simple Rear Panel Connections make setup easy
- Audio Sensing Technology turns amplifier on/off with sound
- Supports Intel “Quick Resume” power control technology
- Volume controlled through PC
- Convenient Media Center
- AC Power Socket
- Advanced Speaker Protection
- Quiet fan cooled
Package Includes
- Media Center Amplifier
- Optical Audio Cable
- USB Cable
- User's Guide
- Vertical Mount Kit (optional)
Detailed Specifications |
Power Output |
- 50 W/ch RMS, 8 ohm (1 kHz sine wave, all channels driven)
- 75 W/ch RMS, 4 ohm (1 kHz sine wave, all channels driven)
- 75 W/ch Peak, 8 ohm (useful power)
- 100 W/ch Peak, 4 ohm (useful power)
|
Frequency Response |
- 20Hz-20kHz (+/-0.2db over the entire frequency range)
|
Total Harmonic Distortion |
- <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
|
Audio Input |
- ADAT (TOSLINK optical connector)
|
Subwoofer Output |
- Line level output, selectable crossover frequency
|
Sample Rate |
|
AC Power |
- 110-125 VAC at 5A (US)
- 220-240 VAC at 2.5A (EU, UK, AUS)
|
Dimensions |
17¼" (width) x 4¼" (height) x 16¼"
(depth)
44cm (width) x 11cm (height) x 41cm (depth) |
Weight |
|